必威直营盘口_首页(欢迎您)

Publications

In Press and Preprints

[-] Suo, S., Gan, Y. (2020) Rupture of liquid bridges on porous tips: Competing mechanisms of spontaneous imbibition and stretching. Langmuir, in press. [DOI][arXiv]

[-]?Wang, Z., Owais, A., Neto, C., Pereira, J.M., Gan, Y. (2020) Enhancing spontaneous droplet motion on structured surfaces with tailored wedge design. Advanced Materials Interfaces, in press. (Invited) [DOI]

[-]?Mohammad, N., Meng, W., Zhang, Y., Liu, M., El-Zein, A., Gan, Y. (2020) Desiccation crack formation and prevention in thin bentonite layers. Environmental Geotechnics, In press. [DOI]

2021

[-] Wang, Z., Pereira, J.M., Gan, Y. (2021) Packing of wet monodisperse spheres. Powder Technology,?378(A): 60-64. [DOI]

[-] Zhang, Y., Proust, G., Retraint, D., Wang, H., Gan, Y.?(2021)?Predicting mechanical properties of 316L stainless steel subjected to SMAT: A sequential DEM-FEM investigation. International Journal of Mechanical Sciences.?193, 106173. [DOI]

2020

[103] Meng, W., Liu, M., Gan, Y., Pauchard, L., Chen, C. Q. (2020). Cracking to curling transition in drying colloidal films. The European Physical Journal E, 43(10): 64. [DOI, PDF]

[102] Nguyen, V.T., Wu, N., Gan, Y., Pereira, J.M., Tang, A.M. (2020) Long-term thermo-mechanical behaviour of energy pile in clay. Environmental Geotechnics, 7(4): 237–248. [DOI, PDF]

[101] Huang, P., Shen, L., Gan, Y., Maggi, F., El-Zein, A. (2020) Numerical investigation of microscale dynamic contact angles of the CO2–water–silica system using coarse-grained molecular approach. Computational Mechanics, 66: 707-722. [DOI, PDF]

[100] Bao, Y., Gan, Y. (2020) Roughness effects of gas diffusion layers on droplet dynamics in PEMFC flow channels. International Journal of Hydrogen Energy, 45: 17869-17881. [DOI, PDF]

[99] Luo, Z., Li, W., Gan, Y., Mendu, K., Shah, S.P. (2020) Novel nanoindentation investigation on sodium aluminosilicate hydrate of geopolymer with different silica modulus and curing conditions. Composites Part B, 198: 108185. [DOI, PDF]

[98] Wang, W., Wei, D., Gan, Y. (2020) An experimental investigation on cemented sand particles using different loading paths: Failure modes and fabric quantifications.?Construction and Building Materials,?258: 119487.?[DOI, PDF]

[97] Luo, Z., Li, W., Gan, Y., Mendu, K., Shah, S.P. (2020) Applying grid nanoindentation and maximum likelihood estimation for?N-A-S-H in geopolymer: Investigation and discussion.?Cement and Concrete Research, 135: 106112.?[DOI,?PDF]

[96]?Wei, D., Hurley, R., Poh, L.H., Dias-da-Costa, D., Gan, Y. (2020) The role of particle morphology on concrete fracture behaviour: A meso-scale modelling approach. Cement and Concrete Research, 134: 106096.?[DOI,?PDF]

[95]?Liang, H., Niu, J., Gan, Y. (2020) Performance optimization for shell-and-tube PCM?thermal energy storage. Journal of Energy Storage,?30: 101421.?[DOI,?PDF]

[94] Ma, J., Wu, S., Zhang, X., Gan, Y. (2020)?Modeling acoustic emission in the Brazilian test using moment tensor inversion. Computers and Geotechnics, 123: 103567.?[DOI,?PDF]

[93]?Wang, Z., Pereira, J.M., Gan, Y. (2020)?Effect of wetting transition during multiphase displacement in porous media. Langmuir, 36: 2449?2458.?[DOI,?PDF]

[92]?Suo, S., Liu, M. and Gan, Y. (2020) Fingering patterns in hierarchical porous media. Physical Review Fluids, 5: 034301.?[DOI,?PDF]

[91] Suo, S., Liu, M. and Gan, Y. (2020) An LBM-PNM framework for immiscible flow: With applications to droplet spreading on porous surfaces. Chemical Engineering Science, 218: 115577.?[DOI,?PDF]

[90]?Vijayan, A., Gan, Y.,?Annabattula, R.K. (2020)?Evolution of fabric in spherical granular assemblies under the influence?of various loading conditions through DEM. Granular Matter, 22: 34.?[DOI,?PDF]

[89]?Delhomme,?F., Hajimohammadi,?A., Almeida,?A.,?Jiang,?C., Moreau,?D., Gan, Y.,?Wang, X., Castel, A. (2020)?Physical properties of Australian hurd used as aggregate for hemp concrete.?Materials Today Communications, 24: 100986.?[DOI,?PDF]

[88]?Xue, K., Han, P., Du, K., Gan, Y., Wang, Z., Bai, C. (2020) Morphodynamics of dense particulate medium under radial explosion. Soft Matter, 16: 1498-1517.?[DOI,?PDF, Back cover]

[87] Wei, D., Zhai, C., Hanaor, D., Gan, Y. (2020) Contact behaviour of simulated rough spheres generated with spherical harmonic.?International Journal of Solids and Structures, 193–194: 54-68.?[DOI,?PDF]

[86]?Behi, M., Shakorian-poor, M., Mirmohammadi, S.A., Behi, H., Rubio, J.I., Nikkam, N., Farzaneh-Gord, M., Gan, Y. and Behnia, M. (2020) Experimental and numerical investigation on hydrothermal performance of nanofluids in micro-tubes. Energy, 193: 116658.?[DOI,?PDF]

[85] Kan, W.H., Zhang, Y., Tang, X., Lucey, T., Proust, G., Gan, Y., Cairney, J. (2020) Precipitation of (Ti, Zr, Nb, Ta, Hf) C high entropy carbides in a steel matrix. Materialia, 9: 100540.?[DOI,?PDF]

[84] Reimann, J., Vicente, J., Ferrero, C. Rack, A., Gan, Y. (2020) 3d tomography analysis of the packing structure of spherical particles in slender prismatic containers.?International Journal of Materials Research.?111(1): 65-77.?[DOI,?PDF]

[83] Gharehdash, S., Shen, L., Gan, Y. (2020) Numerical study on mechanical and hydraulic behaviour of blast-induced fractured rock. Engineering with Computers.?36: 915–929.?[DOI,?PDF]

2019

[82]?Wang, H., Li, S., Li, D., Proust, G., Gan, Y., Yan, K., Tang, D., Wu, P., Peng, Y. (2019) Modeling twinning, detwinning, and dynamic recrystallization of magnesium alloys. MRS Bulletin, 44(11): 873-877.?(Invited)?[DOI,?PDF]

[81] Peeketi, A., Moscardini, M., Pupeschi, S., Gan, Y., Kamlah, M., Annabattula, R. (2019) Analytical estimation of the effective thermal conductivity of a granular bed in a stagnant gas including the Smoluchowski effect. Granular Matter, 21: 93.?[DOI,?PDF]

[80]?Li, C., Maggi, F., Zhang, K., Guo, C., Gan, Y., El‐Zein, A., Pan, Z. Shen, L. (2019) Effects of variable injection rate on reservoir responses and implications for CO2 storage in saline aquifers. Greenhouse Gases: Science and Technology,?9(4): 652-671.?[DOI,?PDF]

[79] Zhang, Y., Proust, G., Retraint, D., Wang, H., Gan, Y. (2019) Discrete Element Simulation of Surface Mechanical Attrition Treatment with Rough-surface Sonotrode.?International Journal of Mechanical Sciences, 161–162: 105060.?[DOI, PDF]

[78] Akhavan, B., Croes, M., Wise, S.G., Zhai, C., Hung, J., Stewart, C., Ionescu, M., Weinans, H., Gan, Y., Yavari, S.A., Bilek, M. (2019) Radical-functionalized plasma polymers: Stable biomimetic interfaces for bone implant applications. Applied Materials Today, 16: 456–473. [DOI,?PDF, Cover]

[77]?Bao, Y., Li, L., Shen, L., Lei, C., Gan, Y. (2019)?A modified smoothed particle hydrodynamics approach for modelling dynamic contact angle hysteresis. Acta Mechanica Sinica,?35(3): 472–485.?[DOI, PDF]

[76] Liu, M., Suo, S., Wu, J., Gan, Y. Hanaor, D.A.H., Chen, C.Q. (2019)?Tailoring porous media for controllable capillary flow.?Journal of Colloid and Interface Science,?539: 379-387.?[DOI, PDF]

[75] Moscardini, M., Pupeschi, S., Gan,?Y., Hernández,?F. A., Kamlah, M. (2019) Discrete Element Analysis of Heat Transfer in the Breeder Beds of the European Solid Breeder Blanket Concept. Fusion Science and Technology,?75(4): 283-298.?[DOI, PDF]

[74]?Dai, W., Hanaor, D., Gan, Y. (2019) The effects of packing structure on the effective thermal conductivity of granular media: A grain scale investigation.?International Journal of Thermal Sciences,?142: 266-279.?[DOI,?PDF]

[73] Mirmohammadi, S.A., Behi, M., Gan, Y., Shen, L. (2019) Particle-shape-, temperature-, and concentration-dependent thermal conductivity and viscosity of nanofluids. Physical Review E,?99: 043109.?[DOI,?PDF]

[72] Birkholz, O., Gan, Y., Kamlah, M. (2019)?Modeling the effective transport properties of the solid and the pore phase in granular materials using resistor networks. Powder Technology,?351: 54-65.?[DOI, PDF]

[71] Huang, P., Shen, L., Gan, Y., Maggi, F., El-Zein, A., Pan, Z. (2019) Atomistic study of dynamic contact angles in CO2-water-silica system. Langmuir,?35: 5324-5332. [DOI, PDF, Suppl. Cover]

[70] Wang, Z., Chauhan, K., Pereira, J.M., Gan, Y. (2019) Disorder characterization of porous media and its effect on fluid displacement. Physical Review Fluids,?4, 034305.?[DOI, PDF]

[69] Wei, D., Zhao, B., Dias-da-Costa, D., Gan, Y. (2019)?An FDEM study of particle breakage under rotational point loading. Engineering Fracture Mechanics,?212: 221-237.?[DOI,?PDF]

[68] Xue, K., Liu, J., Feng, C., Gan, Y., Bai, C. (2019) Explosively driven hierarchical particle jetting. Chemical Engineering Science, 202: 250–269.?[DOI,?PDF]

[67]?Dai, W., Reimann, J., Hanaor, D., Ferrero, C., Gan, Y. (2019) Modes of wall induced granular crystallisation in vibrational packing. Granular Matter,?21: 26.?[DOI, PDF]

[66] Cui, G., Liu, M., Dai, W., Gan, Y. (2019)?Pore-scale Modelling of Gravity-driven Drainage in Disordered Porous Media. International Journal of Multiphase Flow,?114: 19-27.?[DOI, PDF]

[65]?Liu, M., Wu, J., Gan, Y. Hanaor, D.A.H., Chen, C.Q. (2019) Multiscale modeling of the effective elastic properties of fluid-filled porous materials. International Journal of Solids and Structures,?162: 36-44.?[DOI, PDF]

[64] Suo, S., Liu, M., Gan, Y. (2019) Modelling imbibition processes in heterogeneous porous media.?Transport in Porous Media,?126: 615–631.?[DOI, PDF]

2018

[63]?Zhai, C., Gan, Y. (2018)?Electrical percolation in conductive granular media.?Journal of Coupled Systems and Multiscale Dynamics,?6(4):310-316.?[DOI, PDF]

[62]?Huang, P., Shen, L., Gan, Y., Nguyen, G.D., El-Zein, A., Maggi, F. (2018) Coarse-grained modeling of multiphase interactions at microscale.?The Journal of Chemical Physics, 149: 124505.?[DOI, PDF]

[61]?Mirmohammadi, S. A., Shen, L., Gan, Y. (2018) A reliable approach for calculating thermophysical properties of liquid using molecular dynamics simulations. Chemical Physics Letters,?712: 44-53.?[DOI,?PDF]

[60] Li, S., Liu, M., Hanaor, D., Gan, Y. (2018)?Dynamics of Viscous Entrapped Saturated Zones in Partially Wetted Porous Media.?Transport in Porous Media,?125: 193-210.?[DOI, PDF]

[59] Shi, Z., Zhang, Y., Liu, M., Hanaor, D., Gan, Y. (2018)?Dynamic contact angle hysteresis in liquid bridges.?Colloids and Surfaces A. 555: 365-371.?[DOI, PDF]

[58]?Flores-Johnson, E.A., Carrillo, J.G., Zhai, C., Gamboa, R.A., Gan, Y., Shen, L. (2018) Microstructure and mechanical properties of hard Acrocomia mexicana fruit shell. Scientific Reports,?8: 9668.?[DOI,?PDF]

[57]?Pupeschi, S., Moscardini, M., Gan, Y., Knitter,?R., Kamlah,?M. (2018)?Cyclic behavior of ceramic pebble beds under mechanical loading.?Fusion Engineering and Design,?134: 11–21.?[DOI,?PDF]

[56]?Zhai, C., Gan, Y., Hanaor, D., Proust, G. (2018) Stress-dependent electrical transport and its universal scaling in granular materials. Extreme Mechanics Letters,?22: 83-88.?[DOI, PDF]

[55]?Xue, K., Cui, H., Du, K., Shi, X., Gan, Y., Bai, C. (2018) The onset of shock-induced particle jetting. Powder Technology,?336: 220-229.?[DOI,?PDF]

[54]?Xue, K., Du, K., Shi, X., Gan, Y., Bai, C. (2018) Dual hierarchical particle jetting of particle ring undergoing a radial explosion. Soft Matter,?14: 4422-4431. [DOI,?PDF, Back Cover]

[53]?Suo, S., Xu, Z., Li, W., Gan, Y. (2018) Improved mathematical model for analysis of the Payne effect of magnetorheological elastomers. ASCE Journal of Aerospace Engineering,?31(5): 04018046.?[DOI, PDF]

[52]?Peeketi, A., Vijayan, A., Moscardini, M., Gan, Y., Kamlah, M., Annabattula, R. (2018) Effective thermal conductivity of a compacted pebble bed in a stagnant gaseous environment: An analytical approach together with DEM.?Fusion Engineering and Design,?130: 80-88.?[DOI, PDF]

[51]?Liu, M., Wu, J., Gan, Y., Hanaor, D., Chen,?C.Q. (2018) Tuning capillary penetration in porous media: combining geometrical and evaporation effects. International Journal of Heat and Mass Transfer. 123: 239-250.?[DOI, PDF]

[50] Moscardini, M., Gan, Y., Pupeschi, S., Kamlah, M. (2018) Discrete element method for effective thermal conductivity of packed pebbles accounting for the Smoluchowski effect.?Fusion Engineering and Design,?127: 192-201.?[DOI, PDF]

2017

[49] Reimann, J., Vicente, J., Brun, E., Ferrero, C., Gan, Y., Rack, A. (2017) X-ray tomography investigations of mono-sized sphere packing structures in cylindrical containers. Powder Technology,?318: 471-483.?[DOI,?PDF]

[48]?Zhai, C., Hanaor, D., Gan, Y. (2017)?Contact stiffness of multiscale surfaces by truncation analysis.?International Journal of Mechanical Sciences,?131–132: 305–316.?[DOI, PDF]

[47] Hanaor, D., Flores Johnson, E.A., Wang, S., Quach, S., Dela-Torre,?K.N., Gan, Y., Shen, L. (2017) Mechanical properties in crumple-formed paper derived materials subjected to compression.?Heliyon,?3 (2017) e00329.?[DOI,?PDF]

[46] Moscardini, M., Gan, Y., Annabattula,?R.K., Kamlah M. (2017) A Discrete Element Method to simulate the mechanical behavior of ellipsoidal particles for a fusion breeding blanket.?Fusion Engineering and Design,?121, 22-31.?[DOI,?PDF]

[45] Dai, W., Pupeschi, S., Hanaor, D., Gan, Y. (2017) Influence of gas pressure on the effective thermal conductivity of ceramic breeder pebble beds.?Fusion Engineering and Design,?118, 45-51.?[DOI,?PDF]

[44]?Zhai, C., Hanaor, D., Gan, Y. (2017)?Universality of the emergent scaling in finite random binary percolation networks.?PLoS ONE,?12(2), e0172298.?[DOI, PDF]

2016

[43]?Desu, R., Gan, Y., Kamlah, M., Annabattula, R. (2016) Mechanics of crushable binary pebble assembly through Discrete Element Method.?Nuclear Materials and Energy,?9, 237-241.?[DOI, PDF]

[42] Flores-Johnson, E.A., Wang, S., Maggi, F., El Zein, A., Gan, Y., Nguyen, G.D., Shen, L. (2016) Discrete element simulation of dynamic behaviour of partially saturated sand. International Journal of Mechanics and Materials in Design,?12, 495-507.?[DOI,?PDF]

[41] Zhai, C., Hanaor, D., Proust, G., Brassart, L., Gan, Y. (2016) Interfacial electro-mechanical behaviour at rough surfaces. Extreme Mechanics Letters,?9, 422-429.?[DOI,?PDF]

[40]?Liu, M., Wu, J., Gan,Y., Hanaor, D.,?Chen, C. (2016)?Evaporation limited radial capillary penetration in porous media. Langmuir,?32(38), 9899-9904.?[DOI, PDF]

[39] Liu, M., Jin, P., Xu, Z., Hanaor, D.A.H., Gan, Y., Chen, C.Q. (2016) ?Two-dimensional modeling of the self-limiting oxidation in silicon and tungsten nanowires.?Theoretical and Applied Mechanics Letters,?6, 195-199.?[DOI,?PDF]

[38]?Pupeschi, S., Knitter, R., Kamlah, M., Gan, Y. (2016)?Numerical and experimental characterization of ceramic pebble beds under cycling mechanical loading.?Fusion Engineering and Design,?112, 162-168.?[DOI,?PDF]

[37] Liu, M., Zhang, Y., Wu, J., Gan, Y., Chen, C.Q. (2016) Analytical solutions for elastic response of coated mesoporous materials to pore pressure. International Journal of Engineering Science,?107, 68-76.?[DOI,?PDF]

[36] Liu, M., Wu, J., Gan, Y., Chen, C. (2016) The pore-load modulus of ordered nanoporous materials with surface effects. AIP Advances, 6, 035324.?[DOI,?PDF]

[35]?Zhai, C., Gan, Y., Hanaor, D., Proust, G., Retraint, D. (2016) The Role of Surface Structure in Normal Contact Stiffness. Experimental Mechanics,?56, 359-368.?[DOI, PDF]

[34] Hanaor, D., Gan, Y., Revay, M., Airey, D., Einav, I. (2016) 3D printable geomaterials.?Géotechnique,?66(4), 323–332.?[DOI, PDF]

[33]?Hanaor, D., Gan, Y., Einav, I. (2016) Static friction at fractal interfaces.?Tribology International,?93, 229-238.?[DOI, PDF]

Before 2015

[32] Liu, M., Gan, Y., Hanaor, D., Liu, B., Chen, C. (2015)?An improved semi-analytical solution for stress at round-tip notches.?Engineering Fracture Mechanics,?149, 134-142.?[DOI,?PDF]

[31] Alonso-Marroquin, F., Huang, P., Hanaor, D. A., Flores-Johnson, E. A., Proust, G., Gan, Y., Shen, L. (2015) Static friction between rigid fractal surfaces.?Physical Review E,?92(3), 032405.?[DOI,?PDF]

[30] Flores-Johnson, E. A., Rupert, T. J., Hemker, K. J., Gianola, D. S., Gan, Y. (2015) Modelling wrinkling interactions produced by patterned defects in metal thin films. Extreme Mechanics Letters,?4, 175-185.?[DOI,?PDF]

[29] Zhai, C., Hanaor, D., Proust, G., Gan, Y. (2015)?Stress-Dependent Electrical Contact Resistance at Fractal Rough Surfaces.?Journal of Engineering Mechanics (ASCE),?B4015001.?[DOI,?PDF]

[28]?Hanaor, D. A., Chrzanowski, W., Gan, Y. (2015) An approach for the in-situ specific surface area assessment of aqueous oxide particles. Journal of The Australian Ceramic Society,?51(2), 88-93.?[PDF]

[27] Hanaor, D., Gan, Y., Einav, I. (2015) Contact mechanics of fractal surfaces by spline assisted discretization. International Journal of Solids and Structures,?59,?121-131.?[DOI, PDF]

[26] Hanaor, D., Kolb, M., Gan, Y., Kamlah, M., Knitter, R. (2015) Solution based synthesis of mixed-phase materials in the Li2TiO3–Li4SiO4?system. Journal of Nuclear Materials,?456, 151-161.?[DOI, PDF]

[25] Hanaor, D., Ghadiri, M., Chrzanowski, W., Gan, Y. (2014) Scalable surface area characterization by electrokinetic analysis of complex anion adsorption. Langmuir,?30 (50), 15143–15152.?[DOI,?PDF]

[24] Gan, Y., Hernandez, F., Hanaor, D., Annabattula, R., Kamlah, M., Pereslavtsev, P. (2014) Thermal Discrete Element Analysis of EU Solid Breeder Blanket Subjected to Neutron Irradiation.?Fusion Science and Technology,?66(1), 83-90.?[DOI,?PDF]

[23] Annabattula, R. K., Kolb, M., Gan, Y., Rolli, R., Kamlah, M. (2014) Size-Dependent Crush Analysis of Lithium Orthosilicate Pebbles.?Fusion Science and Technology,?66(1), 136-141.?[DOI,?PDF]

[22] Gan, Y., Maggi, F., Buscarnera, G., Einav, I. (2013) A particle–water based model for water retention hysteresis.?Géotechnique Letters, 3(October-December), 152-161.?[DOI, PDF]

[21] Hanaor, D., Gan, Y., Einav, I. (2013) Effects of surface structure deformation on static friction at fractal interfaces.?Géotechnique Letters,?3(April-June), 52-58.?[DOI,?PDF]

[20] Ott, J., V?lker, B., Gan, Y., McMeeking, R. M., Kamlah, M. (2013) A micromechanical model for effective conductivity in granular electrode structures.?Acta Mechanica Sinica,?29(5), 682-698.?[DOI, PDF]

[19] Alonso-Marroquín, F., Ramírez-Gómez, á., González-Montellano, C., Balaam, N., Hanaor, D. A., Flores-Johnson, E. A.,?Gan, Y., Chen, S., Shen, L. (2013) Experimental and numerical determination of mechanical properties of polygonal wood particles and their flow analysis in silos.?Granular Matter,?15(6), 811-826.?[DOI,?PDF]

[18] Zhao, S., Gan, Y., Kamlah, M., Kennerknecht, T., Rolli, R. (2013) Influence of plate material on the contact strength of Li4SiO4 pebbles in crush tests and evaluation of the contact strength in pebble–pebble contact.?Engineering Fracture Mechanics,?100, 28-37.?[DOI,?PDF]

[17] Zhao, S., Gan, Y., Kamlah, M. (2013) Failure initiation and propagation of Li4SiO4 pebbles in fusion blankets.?Fusion Engineering and Design,?88(1), 8-16.?[DOI,?PDF]

[16] Gan, Y., Rognon, P., Einav, I. (2012) Phase transitions and cyclic pseudotachylyte formation in simulated faults.?Philosophical Magazine,?92(28-30), 3405-3417.?[DOI,?PDF]

[15] Annabattula, R. K., Gan, Y., Zhao, S., Kamlah, M. (2012) Mechanics of a crushable pebble assembly using discrete element method,?Journal of Nuclear Materials,?430(1), 90-95.?[DOI,?PDF]

[14] Choi, I. S., Gan, Y., Kaufmann, D., Kraft, O., Schwaiger, R. (2012) Measurement of Young’s modulus of anisotropic materials using microcompression testing.?Journal of Materials Research,?27(21), 2752-2759.?[DOI,?PDF]

[13] Ying, A., Reimann, J., Boccaccini, L., Enoeda, M., Kamlah, M., Knitter, R., Gan, Y., van der Laan, J., Magielsen, L., Di Maio, P., Dell’Orco, G., Annabattula, R. Van Lew, J., Tanigawa, H.,?van Til, S. (2012) Status of ceramic breeder pebble bed thermo-mechanics R&D and impact on breeder material mechanical strength.?Fusion Engineering and Design,?87(7), 1130-1137.?(Invited)?[DOI,?PDF]

[12] Annabattula, R. K., Gan, Y., Kamlah, M. (2012) Mechanics of binary and polydisperse spherical pebble assembly.?Fusion Engineering and Design,?87(5), 853-858.?[DOI, PDF]

[11] Zhao, S., Gan, Y., Kamlah, M. (2012) Spherical ceramic pebbles subjected to multiple non-concentrated surface loads.?International Journal of Solids and Structures,?49(3-4), 658-671.?[DOI,?PDF]

[10] Gan, Y., Kamlah, M., Riesch-Oppermann, H., Rolli, R., Liu, P. (2011) Crush probability analysis of ceramic breeder pebble beds under mechanical stresses.?Journal of Nuclear Materials,?417(1), 706-709.?[DOI, PDF]

[9] Gan, Y., Kamlah, M., Reimann, J. (2010) Computer simulation of packing structure in pebble beds.?Fusion Engineering and Design,?85(10), 1782-1787.?[DOI,?PDF]

[8] Gan, Y., Kamlah, M. (2010) Discrete element modelling of pebble beds: with application to uniaxial compression tests of ceramic breeder pebble beds.?Journal of the Mechanics and Physics of Solids,?58(2), 129-144.?[DOI,?PDF]

[7] Gan, Y., Kamlah, M. (2010) Thermo-mechanical modelling of pebble bed–wall interfaces.?Fusion Engineering and Design,?85(1), 24-32.?[DOI,?PDF]

[6] Rupert, T. J., Gianola, D. S., Gan, Y., Hemker, K. J. (2009) Experimental observations of stress-driven grain boundary migration.?Science,?326(5960), 1686-1690.?[DOI,?PDF, Supplement materials]

[5] Gan, Y., Kamlah, M. (2009) Thermo-mechanical analyses of HELICA and HEXCALIBER mock-ups.?Journal of Nuclear Materials,?386, 1060-1064.?[DOI,?PDF]

[4] Gan, Y., Kamlah, M. (2008) Thermo-mechanical analysis of pebble beds in HELICA mock-up experiments.?Fusion Engineering and Design,?83(7), 1313-1316.?[DOI,?PDF]

[3] Gan, Y. (2008) Thermo-Mechanics of Pebble Beds in Fusion Blankets.Wissenschaftliche Berichte FZKA,?7455.?[PDF]

[2] Gan, Y., Kamlah, M. (2007) Identification of material parameters of a thermo-mechanical model for pebble beds in fusion blankets.?Fusion Engineering and Design,?82(2), 189-206.?[DOI,?PDF]

[1] Gan, Y. X., Chen, C., Shen, Y. P. (2005) Three-dimensional modeling of the mechanical property of linearly elastic open cell foams.?International Journal of Solids and Structures,?42(26), 6628-6642.?[DOI, PDF]

Google Scholar Profile

Publications can also be downloaded from ResearchGate site [Link].

必威直营盘口